Search
Product Introduction
The BrightMaster Facade Cleaning Robot MQ200 is a fully automatic cleaning robot designed for high-rise and ultra-high-rise buildings. By integrating a model of "ground-based manual control, autonomous high-altitude operation Al intelligent detection," it achieves unmanned, intelligent, and standardized curtain wall cleaning. Its primary application scenarios include flat and large-curved glass and metal curtain walls, making it suitable for commercial office buildings, hotels, urban landmarks, and more.
The Facade Cleaning Robot is equipped with a redundant safety system that significantly reduces safety risks associated with high-altitude operations. The modular obstacle-crossing mechanism enables it to navigate most architectural facade decorations.
Additionally, it features an AI vision system for intelligent path planning and cleanliness assessment. What's more, its integrated wastewater recovery unit can prevent secondary pollution to the surrounding environment.
Main Parameters
| Total Weight | ≤ 80 kg | Operating Slope | 0-90° |
| Construction Scenarios | Flat and large-curved glass, metal and stone curtain walls | Moving Speed | 0-0.2 m/s |
| Working Height | ≤200m | Cleaning Efficiency | ≥350 m²/h |
| Operating Voltage | 220V | Obstacle Crossing Height | ≤400 mm |
| Water Supply Method | Surface water supply | Cleaning Width | 1000 mm |
| Overall Coverage Rate | ≥80% | Protection Level | IP 54 |
The MQ200 building facade cleaning robot supports autonomous high-altitude cleaning, reducing repetitive manual work and helping contractors standardize facade maintenance procedures.
The high-rise facade cleaning robot is suitable for high-rise and ultra-high-rise buildings, with a maximum operating height of 200 m.
With a cleaning width of 1,000 mm and a moving speed of up to 0.2 m/s, the robot can achieve a cleaning efficiency of at least 350 m²/h under suitable operating conditions.
The integrated AI vision system identifies facade features, plans cleaning paths and evaluates surface cleanliness to improve working consistency.
The automatic facade cleaning robot can clean flat and large-curved glass, metal and stone curtain walls, making it suitable for different commercial and public buildings.
Its modular obstacle-crossing mechanism enables the robot to pass over common facade decorations and architectural projections with heights of up to 400 mm.
The wastewater recovery unit collects water generated during the cleaning process, helping prevent uncontrolled runoff and secondary pollution.
Multiple safety measures help improve operational reliability and reduce the risks associated with high-altitude facade maintenance.
The MQ200 Facade Cleaning Robot is designed for routine exterior maintenance and large-scale curtain wall cleaning projects, including:
High-rise commercial office buildings
Hotels and serviced apartments
Shopping centres and retail complexes
Urban landmark buildings
Hospitals and public buildings
Exhibition and convention centres
Transportation hubs
High-rise residential developments
Building facade maintenance projects
Post-construction exterior cleaning
The high-rise facade cleaning robot is suitable for cleaning:
Flat glass curtain walls
Large-curved glass facades
Metal curtain walls
Stone curtain walls
Smooth exterior wall panels
Facades with common decorative projections
Vertical and inclined exterior surfaces
The actual cleaning performance may vary according to facade material, surface curvature, contamination type, building structure, wind conditions and available suspension equipment. Customers are advised to provide building drawings, facade photographs and project specifications before deployment.
Inspect the building facade and confirm suspension conditions.
Install the robot and connect the water, power and safety systems.
Set the cleaning area and operating parameters.
Use the AI vision system to identify facade features.
Allow the robot to plan the cleaning path automatically.
Start autonomous high-altitude cleaning.
Monitor operating status from the ground.
Recover wastewater during cleaning.
Assess facade cleanliness and repeat local cleaning where required.
The MQ200 curtain wall cleaning robot is recommended for high-rise or ultra-high-rise buildings with large glass, metal or stone curtain wall areas. It is particularly suitable for properties requiring regular facade maintenance, reduced reliance on rope-access workers and improved wastewater management.
Before recommending the Construction robot, BMR will evaluate:
Building height
Total facade area
Curtain wall material
Surface curvature
Size of facade projections
Roof suspension conditions
Water and power availability
Typical contamination type
Local wind and weather conditions
Required cleaning frequency